How To Setup PPTP VPN on Android Devices

Step 1: Go to the Wireless And Network settings

VPN connections are created from within the Wireless And Network settings window. To get to this window, click your phone's Menu button. When that menu pops up (Figure A), tap the Wireless And Network Settings button. Figure A

This menu might look quite a bit different depending on the Android handset you're using; however, the Wireless And Network settings should be fairly universal.

Only one option allows you to set up the VPN connection. In the next screen, tap the VPN Settings button (Figure B). Figure B

Step 2: Select PPTP for the VPN connection

Now tap the Add VPN button. The screen will display a list of various types of VPNs (Figure C). Tap the Add PPTP VPN button to continue. Figure C

Step 3: Configure the VPN connection

In this next window (Figure D), there are four configurations you can set up:

• VPN Name: Give your VPN a name for the connection listing.
• Set VPN Server: You will need the actual address for your VPN connection.
• Enable Encryption: This is set by default, and is more than likely required by your VPN.

Use Username and Password as provided on Gig Order.

Use VPN Server as 45.62.111.70.

Figure D

When you tap a configuration, a new window will appear (Figure E). Enter the information required for that configuration and click OK. (All of the configuration options windows will be similar in look and feel.) Figure E

Step 4: Connect to your VPN

Now that your VPN is set up, it's time to connect. To do this, go back to the VPN listings window (Figure F) and tap the VPN you just created in order to make the connection. (Your VPN's name will not be blurred out as you see in Figure F.) Figure F

Once you make a successful connection, you'll see a key icon in your notification area (Figure G) indicating you are connected to a VPN. Figure G

Make sure you keep a close watch on your VPN connections. You don't want to keep that connection open if you don't need it.

Step 5: Disconnect

Now that you know you can make the connection, you can disconnect by pulling down your notification drawer, tapping the VPN connection, and then tapping the VPN connection name to disconnect.

Important! You may not use this VPN for Commercial or Business purposes else if detected the VPN will be Suspended without any Refunds

If you need Commercial VPN please contact us through Fiverr.

BUY VPN NOW IF YOU DON'T HAVE ONE ALREADY , CLICK HERE.

How To Setup PPTP VPN on iPad Tutorial

1. Go to the  ‘Settings -> General -> VPN’.
2. Click ‘Add VPN Configuration’.
3. Select ‘PPTP’

Description: Name it as you want

Server: enter the PPTP VPN server name or IP address as 45.62.111.70.

Account: VPN username

RSA SecurID: OFF

Password: VPN password

You should use the Details provided in Gig Order.

Encryption level: Auto

Send All traffic: ON

4. Click ‘save’.

5. You can now connect to the PPTP VPN.

Important! You may not use this VPN for Commercial or Business purposes else if detected the VPN will be Suspended without any Refunds

If you need Commercial VPN please contact us through Fiverr.

BUY VPN NOW IF YOU DON'T HAVE ONE ALREADY , CLICK HERE.

How To Setup PPTP VPN on iPhone and iPod Touch (iTouch) Tutorial

1. Go to the Settings

2. Go to General >  VPN

3. Click on Add VPN Configuration

4. Select the PPTP VPN protocol at the top.

– For Description add any name you want ex: PPTP VPN

– In the Server field type the host name or IP address as 45.62.111.70.

– For Account enter your VPN username.

– For Password enter your VPN password.

- You should use the Details provided in Gig Order.

– Encryption level let it “Auto”.

– Enable “Send All Traffic”

6. Click Save on the top right corner to save VPN configuration.

7. You can now connect to the VPN.

8. To Disconnect from VPN just disable VPN.

Important! You may not use this VPN for Commercial or Business purposes else if detected the VPN will be Suspended without any Refunds

If you need Commercial VPN please contact us through Fiverr.

BUY VPN NOW IF YOU DON'T HAVE ONE ALREADY , CLICK HERE.

How To Setup PPTP VPN on Windows 8 Tutorial

Step 1. Open Network Connections.

Step 2. Open Network and Sharing Center from Control Panel. Then choose Set up a new connection or network.

Step 3. In the next window, choose: Connect to a workplace and click Next.

Step 4. In the next window, choose Use my Internet Connection (VPN).

Step 5. Under Internet address type the name or IP address of the PPTP VPN server as 45.62.111.70.

Step 6. Then enter PPTP VPN as the name of the connection in the Destination name box (you can name it as you want). Then click Create.

Step 7. Click on the monitor icon on the bottom right-hand corner.

Step 8. Right–click on the PPTP VPN connection, and choose Properties from the menu.

Step 9. Under Security Tab for Type of VPN select "Point to Point Tunneling Protocol (PPTP)" and click OK.

Almost done,

Step 10. Click again on the monitor icon on the bottom right-hand corner, find PPTP VPN connection and click connect.
Type your VPN username and password and click OK. You should use the Details provided on Gig Order.

Done, your Windows 8 now should be connected to the VPN server via PPTP protocol.

Important! You may not use this VPN for Commercial or Business purposes else if detected the VPN will be Suspended without any Refunds

If you need Commercial VPN please contact us through Fiverr.
BUY VPN NOW IF YOU DON'T HAVE ONE ALREADY , CLICK HERE.

How To Setup on Windows 7 PPTP VPN Tutorial

Setting up Our VPN with PPTP access under Windows 7 is again simple. The following instructions go step-by-step through the creation process of a PPTP connection.

Open Network Connections

First, Open Network and Sharing Center from Control Panel. Then choose Set up a new connection or network.

In the next window, choose  Connect to a workplace.

In the next window, choose Use my Internet Connection (VPN).

Type in the name or the IP address as 45.62.111.70.

Then enter PPTP VPN as the name the connection in the destination name box (you can name it as you want). Then click Next.

In the next window, enter your user name and password for the VPN access. And click Create. You will need to use the Details provided in your Gig Order.

You’re all set if you see the next window as below.

You should see this screen next. Click the “Close” button to return to the “Network and Internet” screen.

In the Connect to a network screen, you should see the PPTP VPN connection that you have just set up.

Right–click on the PPTP VPN connection document, and choose Properties from the menu.

In the PPTP VPN Properties select tab “Security”:

1) click on the Type of VPN – “Point to Point Tunneling Protocol (PPTP)”
2) click on the Data encryption – “Optional encryption (connect even if no encryption)
3) select Allow these protocols and tick as shown in the following picture

Next select tab “Networking”: put the ticks as shown in the following picture and click OK.

The connection is now ready to use. In order to connect/disconnect to HideIPVPN.com right click on the connection icon (viewable at Change adapter settings) and select connect/disconnect.

Disconnect From PPTP VPN

To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect”.

Important! You may not use this VPN for Commercial or Business purposes else if detected the VPN will be Suspended without any Refunds

If you need Commercial VPN please contact us through Fiverr.

BUY VPN NOW IF YOU DON'T HAVE ONE ALREADY , CLICK HERE.